2. ENSURE that the dimension from the face of the
door to the centerline of the door arm mounting
hole is 6-3/8
"
(162 mm).
3. TIGHTEN the four set screws securing the door
arm pivot to the door arm pivot bracket.
1. Refer to Figure 12, and SLIDE the door arm pivot
over the door arm pivot bracket.
700002-Rev N 09/18
®
5800 ADAEZ PRO
Installation and Operation Instructions
16 of 50
Installing the Door Arm Pivot
Figure 12
Operator And Door Arm Installation Instructions - Push Side Applications
6
6 3/8”
11 3/4”
CENTERLINE OF
HINGE OR DOOR
PIVOT
FACE OF
DOOR
DOOR
DIMENSION BETWEEN
DOOR ARM PIVOT
BRACKET MOUNTING
PLATE AND FACE OF
DOOR:
MINIMUM: 5/8”
MAXIMUM: 1-1/2”
