ASP Sterrad Velocity Reader, Руководство пользователя

Страница: 54 / 82

8
Troubleshooting
48 STERRAD VELOCITY Reader User’s Guide
Problem/Error Message Possible Cause Suggested Solution
An expired biological
indicator has been
scanned. Please use
a STERRAD VELOCITY
Biological Indicator that
has not expired. BI is past its
expiration date. Confirm the expiry date of BIs
from labeling and ensure that
the BIs are not expired. Do not
use expired BIs for incubation.
Follow hospital or healthcare
facility policy and procedures
on disposal of the expired BI.
Process the load with a new BI.
A record exists of this
biological indicator
having been sterilized.
It cannot be used as
a control. Please use
a STERRAD VELOCITY
Biological Indicator that
has not been sterilized. User scans a test BI
when add control
was selected. If adding a test BI, select Test
before scanning the BI barcode.
If adding a positive control BI,
select Control and scan a BI
which has not been exposed
to a sterilization cycle or
been previously processed
in the reader.
You’ve placed the
biological indicator in the
wrong well. Please remove
the biological indicator
and place it in the selected
well: well No. X. BI placed in the
wrong well. Move the BI to well No. X.
The biological indicator
has not been added to well
No. X. This session has
been canceled. Too much
time has elapsed and the
well remains empty. Well No. X remains
empty. Start over and re-enter the BI
information. If a BI was inserted
but not sensed, then perform
an insertion sensor calibration.
Refer to the “Calibrate Insertion
Sensor” section (Chapter 7) for
more information.
Our records indicate that
this biological indicator is
not from a completed cycle.
It cannot be incubated. BI is from a canceled
cycle. Use a BI from a completed
cycle.