ASP Sterrad Velocity Reader, Руководство пользователя

Страница: 57 / 82

Troubleshooting
8
STERRAD VELOCITY Reader User’s Guide 51
Problem/Error Message Possible Cause Suggested Solution
A biological indicator
has been scanned from
a different lot than
lot #XXXXXXX. Please
use a STERRAD VELOCITY
Biological Indicator from
lot #XXXXXXX. Positive Control BI
from a different lot
than the test BI. Scan a positive control BI from
the same lot as the test BI.
The biological indicator
has not been properly
activated. Remove the
biological indicator from
well No. X and continue
for instructions. BI improperly
activated. Growth
medium has not
moved into the
growth reservoir
or has excessive
bubbles. Perform the activation
sequence again making sure
that the growth medium is free
of large bubbles and fills the
growth reservoir. Reinsert the
BI in the selected well. Do not
cancel the sequence. Simply
check the activation and
follow on screen instructions.
A control biological
indicator has not been
incubated for this lot in
the last 24 hours. Please
scan a control now. No positive control
BI has been run for
24 hours. Run a positive control BI. If
biological indicators from the
same lot are not available then
follow on-screen instructions
for processing a BI from a
different lot.
Our records indicate that
the scanned biological
indicator has been
sterilized in more than
one cycle. It cannot
be incubated. BI exposed to
multiple sterilization
cycles. Only incubate BIs which
have been through one
sterilization cycle.
STERRAD ID or Cycle Type
is not available when
manually entering cycle
information. STERRAD Sterilizer
has not been added
to the system. Login as an administrator and
add the STERRAD Sterilizer
under Manage Sterilizers.
Utilities > Manage Sterilizers >
Add New