manualshive.com logo in svg

ASP Sterrad 100NX, Руководство пользователя, Страница: 27 / 110

Поделиться
Скачать
ASP Sterrad 100NX Скачать руководство пользователя страница 27

Load Preparation

 

3

STERRAD

®

 100NX

®

 User’s Guide

25

Guidelines for Preparing Items to 
Be Sterilized

Note: All items must be cleaned, rinsed, and thoroughly 

dried before being placed in the STERRAD

®

 100NX

®

 

Sterilizer. Loads containing moisture may cause 
cycle cancellations.

Cleaning, Rinsing, and Drying

Cleaning and sterilization are two separate processes. Proper cleaning of 
instruments and devices is a critical and necessary step prior to sterilization.

All items including accessories must be thoroughly cleaned, rinsed, and 
dried before loading into the sterilizer. 

Carefully inspect all instruments, devices, and accessories for cleanliness 
and dryness prior to packaging. If visible soil is present, the item must be 
re-cleaned and dried prior to sterilization. If moisture is present, dry the 
item thoroughly prior to sterilization.

Carefully inspect all instruments, devices, and accessories for flaws or 
damage prior to packaging. Items with flaws or damage should be 
replaced or repaired before using.

Note: Periodic careful inspection of items after repeated 

exposure to disinfectant/cleaner/sterilant is necessary, 
due to the potential damaging effects of the chemical 
agents.

Cleaning is necessary to remove organic and inorganic soil and debris from 
equipment. This process also removes many microorganisms from the surface 
of the items. Sterilization then inactivates all remaining spores and live 
microorganisms.

Clean

 your devices according to the medical device manufacturers' 

instructions. You must remove all blood, tissue, and soil from items using 
appropriate detergents, cleansers and/or methods. 

Rinse

 items thoroughly to remove detergent or cleanser residue. Use 

treated water that is of a quality that ensures hard water stains do not 
occur. Failure to remove all organic materials or detergents may result in 
the formation of light-colored residue on the devices. If residue is visible, 
you should clean, rinse, dry, and resterilize the device prior to use.

DRAFT

Содержание Sterrad 100NX















































































































Отзывы:

Нет отзывов