___________________________________________________________________________________
ARTURIA – JUPITER-8V – MANUAL - EN
42
When this button is selected, a window appears, allowing the choice of a preset bank “Project” for
the Jupiter-8V. Choose the file to import, and click on "Open". The new bank of presets will appear
automatically among the available banks “Project”.
The Jupiter-8V offers the possibility to export user created sounds in order to use them on other
machines, or to share them with other users. It is possible to export a preset, a sub-bank, or a
complete bank. To export the “project”, click on the export button for the preset-bank on the tool
bar:
Then select the type of export that you want to carry out (bank, sub-bank or preset), in the list. A
window appears, allowing the choice of a destination folder and a file name for the bank to export.
Export a preset bank “project”
5.3
Using the controllers
5.3.1
Knobs
Generally the sequencers offer several knob control modes.
The default mode of control for knobs with the mouse is the circular mode: click on the knob and
turn around it in order to change the value of the controller. The circular mode gives high precision
in the manipulation of controls: The further the mouse goes from the knob, the higher the precision
of the setting.
In linear mode, the knob can be set only by vertically moving the mouse, not by going around it.
Like the sliders, it is possible to obtain a higher precision by right clicking or Shift+Click on the knob
concerned.