___________________________________________________________________________________
ARTURIA – JUPITER-8V – MANUAL - EN
55
BEND
: Selectors of the destinations that can be modulated by the PITCH BEND
•
ON / OFF switch (« VCO 1»)
•
ON / OFF switch (« VCO 2»)
•
ON / OFF switch (« VCF »)
VCO level
: Slider to set the intensity of the modulation BEND affecting the VCO (From 0 To
+24 semi-tones / – 24 semi-tones)
VCF level
: Slider to set the intensity level of the modulation BEND affecting the VCF
BENDER
:
pitch bender (movement towards the left: the tune is diminished; movement
towards the right, the tune of the oscillators is increased)
PORTAMENTO level
: Slider to set the level of portamento
PORTAMENTO select
: Switch to use the portamento:
•
Connection Section UPPER (« UPPER ONLY»)
•
Connection PORTAMENTO OFF
•
Connection Sections LOWER et UPPER (« ON »)
6.1.8
La section modes de jeux (« KEY MODE »)
The methods of playing indicate the distribution of the programs on the keyboard. They are 3
selectable configurations able to set to: « ON/OFF »:
DUAL
: Two selected programs on the LOWER and UPPER part can be played
simultaneously on the keyboard. The polyphony is then divided by two.
SPLIT
: Two selected programs are assigned the LOWER and UPPER part of the keyboard.
The polyphony is then divided between the two selected programs.
WHOLE
: A single program is assigned to the entire keyboard range.
Key modes
6.1.9
The arpeggiator (« ARPEGGIO »)
This section shows the connections that are necessary to make the arpeggiator work. It allows
performance of patterns of notes in a particular order, evolving according to the notes played.
In SPLIT mode, the arpeggiator only works with the lower part of the keyboard.
In DUAL MODE, the arpeggiator works on both parts of the keyboard.
The pattern development is possible to control with two parameters:
RANGE
: Choose the range of the arpeggiator 1-4(in octaves):
•
One octave (button ON/OFF « 1»)
•
Two octaves (button ON/OFF « 2»)
•
Three octaves (button ON/OFF « 3 »)
