___________________________________________________________________________________
ARTURIA – JUPITER-8V – MANUAL - EN
86
Open the "Modulations" page
Choose the destination parameters of the modulations for LFO1 (Y output) and 2 (Y output).
LFO1: "HPF Cutoff"; and LFO2: "VCF Cutoff".
Set the depth of these modulations with the knobs situated next to these destinations.
(Take values around “0.900" for the HPF "Cutoff" and "500" for the "VCF Cutoff")
Settings of the galaxy unit
If you wish to give space to your sound, add chorus, reverb or delay effects. To do that, click on
"Effects" situated in the upper panel of the Jupiter-8V.
In the first one "Voice" effect slot (at the top of the connection diagram of the effects),
choose "Chorus / Flanger". This one will be placed between the VCO and the filters.
Set the speed of the chorus frequency with the ("Rate") knob to your convenience
You also can adjust the numbers of repetitions ("feedback") to your convenience.
Set the "dry/wet" knob of the chorus in a manner to balance between the original and the
effected sound.
Setting of the Chorus
In the first "Patch" effects slot (underneath the "Voice" effects on the connection diagram of
the effects), choose "St FX Reverb"
