___________________________________________________________________________________
ARTURIA – JUPITER-8V – MANUAL - EN
57
Assing mode section
Attention!
Only
the volume envelope will be used by the hold function. That allows you to bring live to the sound while
keeping the envelope free for the filter.
6.1.11
The Tune section
Among these parameters you will find: the general tune of the Jupiter-8V, the detune option for the
voices and a 440 tone to tune the Jupiter-8V.
The “tune” parameters
TUNE
: knob to set the general tune of the synthesizer
V.DETUNE
: setting the amount of detune of the polyphonic voices
Notice! The detune knob of the polyphonic voices is very useful to make out-of-tune sounds in the "unison" mode. It will
sound a little like the effect of a chorus. When the "Unison" is not active, this parameter brings again a little more
instability to the tune of the oscillators, a typical characteristic of the original machine.
6.1.12
The wheels
The wheels, situated to the left of the virtual keyboard, allow to control the (« PITCH ») of the
oscillators or the amount of modulation by the LFO(« MOD »)
PITCH
: Controls the pitch of the two Oscillators
MOD
: Button to control the LFO modulation
6.2
Step Sequencer
The sequencer is a 32 step sequencer.
It allows the creation of several melodic lines (when one of the three available modulations is
affecting the frequencies of the VCO) as well as creation of dynamic modulations of other
parameters such as the cutoff frequency of the VCF or on the width of the square waveform of the
VCO's.
Click on the «SEQUENCER/ GALAXY » tab, then click on the « SEQUENCER » tab to bring up the
interface.
