___________________________________________________________________________________
ARTURIA – JUPITER-8V – MANUAL - EN
45
To choose the function to edit, click on one of the buttons situated on left top corner of the
screen. (« PRESET » for example). The « SEQUENCER/GALAXY » screen has two tabs that let
you edit the sequencer and the galaxy module.
Lcd screen
5.3.8
MIDI control
Most of the knobs, sliders and switches on the Jupiter-8V can be manipulated with external MIDI
controllers. Before anything else, make sure that the MIDI device is correctly connected to the
computer, and that the sequencer or the standalone Jupiter-8V application is correctly configured
to receive MIDI events coming from the device.
Every instance of the Jupiter-8V receives MIDI events transmitted on a given channel. This reception
channel is defined in a global manner for the synthesizer, either through the sequencer, or in the
standalone Jupiter-8V application. The Jupiter-8V can receive up to 120 different MIDI controls. It is
possible to choose a control for each knob. For this, click on the knob while holding down the
Control key. A configuration window appears and will allow you to choose a MIDI control number.
You can also click on the «Learn» button and move one of your physical MIDI controllers. In this
case, the control number will be detected and configured automatically. To deactivate the MIDI
control of a knob, simply uncheck the «Active» option in the MIDI control window.
Midi configuration window of a knob
5.3.9
The preference screen
On this screen, you be able to:
•
See the version of the software
•
Read the credits
To open this window, click on the “About” button situated on the down right of the Jupiter-
8V interface.
