___________________________________________________________________________________
ARTURIA – JUPITER-8V – MANUAL - EN
22
It is also possible to directly select the presets on the toolbar situated on the top of the Jupiter-8V
interface.
Click on the one of the first 2 tabs situated on the tool bar to choose a filtering criteria –
(the name of the project for example)
Then click on the third tab to choose the name of the preset that you wish to edit.
Choose a preset patch from the toolbar
The JUPITER-8V is delivered with 400 presets that will allow you to become familiarized with the
tones of the synthesizer. A bank named "To Wear / Temp" provides a selection of templates to
begin the programming of a sound. (The sound “1_Osc", for example, presents an oscillator going
into a low pass filter, next being routed toward the VCA.)
It is also possible to show all the presets when choosing the option "All" in the bank. For example, to see the bass presets,
click on "All" in the selection of the bank and then click on "Bass".
3.2.3
Editing the presets
To begin, we will start with a very simple manipulation.
Modify the brightness of the sound "Full_ Pad" with the "CUTOFF" knob (VCF for Voltage
Controlled Filter). For that, turn the knob toward the right or toward the left. The timbre
of the sound will change to more or less "brilliant". Tune this knob to your liking.
Change the brightness of the sound
In the same way, you can increase the range of the oscillator 2 (VCO2 for Voltage Controlled
Oscillator) by an octave with the knob "RANGE". Choose a value of "4'".
