Artifex LDD100-F Series, Оригинальная инструкция по эксплуатации

Страница: 57 / 72

LDD100 Operating Instructions
57 / 72
10.1.3 Field “Pulse Repetition”
Figure 12: Field “Pulse Repetition”
Pulse repetition: Input an integer and select the units (ns, µs, ms) from the dropdown
box in order to set the temporal value. The meaning of this value is
determined by selection of one of the three radio buttons described
below.
Period: Radio button to select that the numerical input is to determine the
period of the pulses of the current sequence.
Separation: Radio button to select that the numerical input is to determine the
separation of the pulses of the current sequence.
Repetition rate: Radio button to select that the numerical input is to determine the
repetition rate of the pulses of the current sequence.
10.1.4 Field “Triggering Mode”
Figure 13: Field “Triggering Mode”
External: The sequence as programmed through all of the other parameters is
enabled by clicking the “Start” button on the GUI (Control section).
However, the sequence will only start when the first rising edge into
the “External Trigger” BNC-receptacle on the back panel of the
main control unit is detected.
Internal: The sequence as programmed through all of the other parameters is
started by clicking the “Start” button on the GUI.