Artifex LDD100-F Series, Оригинальная инструкция по эксплуатации

Страница: 56 / 72

LDD100 Operating Instructions
56 / 72
10.1 Settings
The GUI is arranged in logical fields which are described in the sections below.
10.1.1 Field “Control”
Figure 10: Field “Control”
Start: Starts a sequence of current pulses.
DANGER!
The device under test will begin to emit potentially dangerous levels of
laser power immediately after clicking the “Start” button. Ensure that all
personnel are appropriately warned and wearing safety goggles.
Pause: Pauses the present running sequence. When pressed during a
sequence, the “Stop” button on the front panel of the main unit will
blink (red) until the sequence is continued (by clicking the “Start”
button) or until the sequence is aborted (by clicking the “Stop”
button).
Stop: Immediately stops the current driver and aborts the present running
sequence.
10.1.2 Field “Pulse Width”
Figure 11: Field “Pulse Width”
Pulse width: Input an integer and select the units (ns, µs, ms) from the dropdown
box in order to set the width of the current pulses to be driven.