34
Camera Preparation
6.3
Mounting the Camera to a Bridge Plate
Required Tools
Flat screwdriver
1
3
2
1. For mounting to a bridge plate, use the BPA-3
bridge plate adapter.
2. Place the bridge plate unter the adapter (1).
3. Adjust the bridge plate's nose (3) to the
adapter's aperture.
4. With a flat screwdriver, attach the screws to
the adapter and tighten (2).
5.
Note:
Always ensure a proper lock.
NOTICE
Always use a flat screwdriver to connect the BPA-3 to a bridge plate. Never use a
coin. A coin does not deliver enough force to ensure a proper lock.
6.4
Mounting the Camera to a Wedge Plate
1
2
1. For mounting to a wedge plate, use the
WPA-1 wedge plate adapter.
2. Open the quick-release base plate.
3. Place the adapter (1) into the quick-lock plate
slighty behind the connection points.
4. Slide the camera forward until the quick-lock
audibly locks (2).
5.
Note:
The lock must be closed.
