28
Yes
Alert
No
Connect mattress?
Mattress not connected!
Pause
Alarm
Reset
Alarm Condition
Unit is over-temperature
Pause
Alarm
Reset
Alarm Condition
Therapy in-active
Alert
Yes
Ready to start?
Mattress not connected!
Over Temperature Alarm
This screen is displayed when the therapy unit
has overheated, this may be due to a blockage
or a high ambient temperature.
Check that the air vents on the system are clear
IURPREVWUXFWLRQDQGWKDWWKHDLU¿OWHULVFOHDQ
Power the system down and allow it to
FRROVXI¿FLHQWO\
Therapy Inactive Alarm
This screen is displayed when the system has
been left in an alert condition for more than
two minutes.
The alarm sounder may be paused for two
minutes by pressing the pause button.
Mattress Not Connected Alert
This screen is displayed when the system is
powered up before connecting the air supply
connector to the therapy unit.
Connect the air supply connector and press the
YES button to clear this alert.
Press NO to display the CPR Alarm screen.
This screen is displayed after pressing the YES
button on the previous screen.
Connect the air supply connector and press
YES to begin therapy and clear this alert.