15
PREPARATION FOR USE
This chapter describes the steps necessary to prepare the
TheraKair Visio
MRS for use.
Check Out Procedures
7KHXQLWLVVKLSSHGIURP$UMRUHDG\WREHSXWLQWRVHUYLFH%HIRUHSXWWLQJWKHXQLWLQWRVHUYLFHWKH
IROORZLQJVWHSVVKRXOGEHSHUIRUPHG
1. Remove the mattress and the therapy unit from their packaging.
Do not use sharp instruments to open packaging. Damage could result to mattress,
cover sheet, therapy unit or mattress hose.
2. Inventory and visually inspect that the following items are present and in good condition:
•
One
TheraKair Visio
MRS Therapy Unit
•
One
TheraKair Visio
MRS Form Fitted Cover Sheet
•
One
TheraKair Visio
MRS Mains Power Supply Cord
•
One
TheraKair Visio
MRS Mattress
•
One
TheraKair Visio
MRS Tote Bag
•
One
TheraKair Visio
MRS User Manual
Contact carrier and Arjo immediately if damage is observed.
Preparing the System for Use
Fitting the Mattress to the Bed
1. Level the bed and adjust to the lowest height.
2. Remove the hospital mattress from the bed.
3. Place the
TheraKair Visio
MRS Tote Bag on the hospital bed.
4. Open the tote bag and remove the mattress and the cover sheet. Unfasten the straps on
the mattress. Place such that the air cushions are on top of the mattress and the hose
connections are towards the foot of the bed.
5. Fit the cover sheet to the mattress.
