Arjo Enterprise E8000X, Руководство по обслуживанию

Страница: 24 / 105

Servicing Instructions Enterprise E8000X Service Manual
Page 20
1.2 Actuator Cable Clips
Where cables are connected to actuators they are held in place by retaining clips.
Figure 2: Actuator cable clip
To release the clip, use a small screwdriver to press in the retaining lugs on either side of the socket
(Fig 2, Item A) and pull the clip out (B).
To refit the clip, push it towards the socket until it "clicks" into position.
1.3 Sealing Rings
Where electrical cables enter actuators, junction boxes or the control box, the plug has a rubber sealing
ring to ensure the connection remains watertight.
Apply a small amount of lubricant, e.g. petroleum jelly, to the sealing rings to make it easier to insert the
plugs. Do not allow excess lubricant to contaminate the electrical contacts.
A
B