Ariterm Arimatic 151, Руководство пользователя

Страница: 31 / 43

v2.00 Ariterm Oy 21.5.2013
30
for the set time, but the funnel
sensor has not detected any fuel,
the bar discharger is activated for
the set duration.
Running time 10s 0-60s Bar discharger operating time.
If BAR DISCHARGER is selected in the OPTIONS -menu, the SETTINGS -
page will also display the BAR DISCHARGER -settings. When the storage
auger has run for the set Start delay -time, but the funnel sensor has not
detected any fuel, the bar discharger is activated for the set duration. The bar
discharger runs for the duration of the
Running time -setting. Time should be
set so that the cylinder performs one reciprocating motion at most.
17.2 Sweeping settings
Figure 18. SWEEPING settings
Setting Factory
setting Setting
frequency Function
Running time
(minutes) 4 min 0-60 min Sweeping duration
Pause time
(minutes) 60 min 0-60 min Sweeping pause duration.
The sweeping motor moves spirals inside the convection pipes in a
reciprocating, horizontal motion. The sweeping motor is run for a set time
(
Running time -setting) in set intervals ( Pause time -setting). NOTE! The
boiler should also be swept manually. See boiler instructions.