Ariterm Arimatic 151, Руководство пользователя

Страница: 21 / 43

v2.00 Ariterm Oy 21.5.2013
20
Burner power is adjusted according to the boiler water temperature. The
desired boiler water temperature is entered into the
Temperature setting -
field. Burner effect PI control maintains the set temperature. The
Temperature hysteresis -setting determines the temperature at which the
burner switches to upkeep mode.
EXAMPLE: if Temperature setting = 80°C and Temperature hysteresis =
5°C, the burner switches to upkeep mode when the boiler water temperature
reaches 85°C. When the temperature decreases by 0.5 x Hysteresis , 2.5°C in
the example, the burner switches back to effect mode (effect level 21%).
During normal use the burner is run by automatically adjusting the effect
according to temperature requirements. In this case, the effect is adjusted in
1% increments between 20-100%. The burner can also be run at a fixed effect
during burner adjustments. The desired effect percentage is set with the
Manual effect setting after the AUTO/MANUAL -button is pressed to select
the MAN -mode. In this mode, the burner is run at a fixed effect, until
hysteresis switches the burner to
upkeep mode. Upon switching back to effect
mode, the burner continues at a fixed effect level.
By pressing the TREND/PID -button, you can review effect and boiler water
temperature changes in a time range. The trend review tool is particularly
useful for adjusting effect parameters during commissioning. This also allows
the user to adjust the enhancement and Ti values of the control. The
Gain (P)
and Integration time ( Ti) -settings control the adjustment speed and
accuracy.
Figure 11. EFFECT CONTROL page - Trend.