Revised by R. Robinson
Issue AV1.13 8 June 2006
33
This will force the system to use a CO from the group 02 in
for all outgoing calls when 04 are the
first two digits. You can define up to 8 digits for the SPD (trunk select) code.
AUTO TRUNK SELECTION WILL OPERATE:-
1.
WHEN A CO IS MANUALLY SELECTED, OR
2.
WHEN USING THE “DIAL 9” FEATURE, OR
3.
WHEN USING SPEED DIAL CODES, OR
4.
WHEN USING THE REDIAL FETAURE.
THE ABOVE APPLIES TO BOTH KEYPHONES AND SLTs.
The trunk group selection works as in the table below:
SPD code programmed to use CO
CO group that will be used
01 01
02 02
03 03
04 04
05 05
06 06
07 07
08 08
09~12 05
00 05
When programming Speed Dial codes (
, codes 100~199 and 200~???), the code can be programmed
to use a particular CO. In this case it will not select the particular CO but select a CO from the group as above.
This means that if the function is invoked, all calls whether manually dialed or Speed dialed, will trunk select
from the
groups according to the programming.
You can force carrier selection, or you can force selection of ISDN/PSTN as desired.
enables / disables the LCR function
Digit insert LCR is disabled and Toll password is disabled
= 03
CO select LCR and Toll password is disabled
Digit insert LCR is enables and Toll password is disabled
Digit insert LCR is enabled and Toll password is enabled
must not be set to 0 or only the first 50 System Speed Codes will be available.
Digit Insertion LCR with Zone 253 = 10
If Zone 253 = 10, the following features are available
a)
digit deletion and insertion (digit replacement)
b)
Digit insertion using a common number to be inserted
c)
Normal digit insertion operation.
This is achieved by using different areas of the Zone 404 look up table (codes 150~199)
Examples:-
Zone 253 = 10
Digit replacement.
Zone 404 codes 150 ~ 159 are used for digit replacement. The number to be matched is programmed into code
150 as usual, as are the times and insert codes.
Zone 404 code 150:-
03--------0000--000--02------
If an extension dials
03
98372300, the system will replace the
03
with
02
and it will dial
02
98372300.
Digit insertion to a common number
Zone 404 codes 160~169 are used for common insertion.
Zone 404 code 160:-
03--------0000--0000----------
Zone 404 code 161:-
