Revised by R. Robinson
Issue AV1.13 8 June 2006
40
Use the numerical dial pad to select the alphabet letters required.
Related Zones.
Nil
Zone 311
to
Zone 399 Reserved
Zone 400
Consl (Group = 1 of 8 max)
Default value =
11 12 13 14 for each group
Range =
N/A
This Zone allows the programmer to set the consoles for the 8 “Consoles Groups or companies”.
A maximum of 4 Consoles can be assigned for each group.
The first station entered in each group is the Master Console for that group.
NOTES.
Groups
1~4
The first console in the group is the master console and will display Night Service message
as well as the conf/dnd led lighting. It is also the console that will ring if a group station dials
the operator.
The second console in the group will have Conf/DND LED flashing for Night Service
indication. It will ring if the operator is dialed and 1
st
console is busy.
The third console in the group will have Conf/DND LED flashing for Night Service
indication. It will ring if the operator is dialed and the 1
st
and 2
nd
consoles are busy.
The fourth console in the group will have Conf/DND LED flashing for Night Service
indication. It will ring if the operator is dialed and the 1
st
, 2
nd
and 3
rd
consoles are busy.
Group 04 is also used for midday console extensions
Group 5
This Group can be used as the Voice Mail Group. Any calls transferred to a Voice Mail
station should be to an SLT in this group. The station should be set as a Voice Mail channel
(
). Busy/No-Answer hunting is automatic for type 7 (
SLTs in this group
Group 6
This group is the group that night time DISA No Answer calls will be transferred to when
is enabled.
Group 7
ITEM 02 IS THE KEYPHONE EXTENSION TO BE USED FOR
UNSUPERVISED REMOTE PROGRAMMING.
ITEM 04 IS THE CONSOLE FOR FUNC, 2, 6, CALL FORWARDING
is not = 0, and after 3 attempts to transfer to a console are unsuccessful; the call
will be transferred to an SLT EXT that is the first assigned Extension in this group. The
system will attempt to the transfer according to the conditions in
. It is common for
this EXT to be an answering machine.
Group
8
= 2 or 3, only consoles in this group can record the messages for Voice Service
card recording.
Related Zones.
,
,
Zone 401
S.D.I.
(see text for group)
Default value =
00 00 00 00 00 00 00 00
Range = N/A
This Zone allocates the possible 7 groups available for one digit intercom dialing. If
=1 then only
group 1 is available, and the single digit dials the extension in group 1. ie: dialing 1 gives the ext in Item 01,
dialing 2 gives the ext. in Item 02, etc. If
=2 then all 7 groups are available and all extensions in a
group will ring in common. The group can be rung by dialing the single digit of the group number. If a 6 is
dialed first, the full extension number can then be dialed to contact a particular extension. This means that
the 6
th
position (Item 06) in each group when 209=1 is not valid.
If Z209
= 0
This zone is disabled.
If Z209 = 1
Only group one is available.
Item 1 in the group is the extension rung if a 1 is dialed
~
Item 2 in the group is the extension rung if a 2 is dialed
Item 6 must not be programmed
If Z209 = 2
7 Groups are available. 1, 2, 3, 4, 5, 7, 8
The single digit dialed will ring all the extensions set in the Group
