Revised by R. Robinson
Issue AV1.13 8 June 2006
18
Zone 206
Local Digit LEN.
Default value =
0
Range =
(0 ~ 9)
This Zone allocates the number of digits in a local call number.
Related Zones.
Zone 207
ICM Call(KP) TYPE
Default value =
1
Range =
(0:V or 1:R)
This Zone allows the system to signal an intercom call by voice(0) or ringing (1). The caller can alternate the
signaling by pressing the * key.
Related Zones.
None
Zone 208
ICM DT SIGN
Default value =
0
Range =
(0:S ~ 1:I)
This Zone allocates either continuous tone (0) or interrupted tone (1) for intercom dial tone.
Related Zones.
None
Zone 209
ICM ODD
Default value =
0
Range =
(0 ~ 1)
This Zone enables or disables single digit dialing for intercom calls. The groups are set in
0= Single Digit Dialling is disabled
1= Dial the extension as set in
, within a Group 1=first ext.,2=second ext.,3=third ext., etc.
2=Dial the whole group as set in
using Common Signalling
. Group1=dial 1, Group 2= dial 2, etc.
3=Dial the group number (7 groups max) and the calls are rotated through the group as set in
turn from Item 01 to 08
NOTE! Only 1,2,3,4,5,7,and 8 can be used for single digit dialling
6, 9 & 0 ARE NOT VALID EXTENSIONS NOR ARE THEY VALID EXTENSION GROUPS.
6 IS THE “BREAK-OUT TO FULL EXTENSION NUMBER” CODE.
I.E. TO RING A SPECIFIC EXTENSION, DIAL 6 AND THEN THE EXTENSION NUMBER.
Only Group 01 is available
DIGIT DIALLED
EXTENSION TO RING
1
Group 01 Item 01
2
Group 01 Item 02
3
Group 01 Item 03
4
Group 01 Item 04
5
Group 01 Item 05
7
Group 01 Item 07
8
Group 01 Item 08
Zone 209 = 2
All 7 Groups (1, 2, 3, 4, 5, 7, 8) are available
DIGIT DIALLED
EXTENSION TO RING
1
Group 01 Items 01~08
2
Group 02 Items 01~08
3
Group 03 Item 01~08
4
Group 04 Item 01~08
5
Group 05 Item 01~08
7
Group 07 Item 01~08
8
Group 08 Item 01~08
continued
All 7 Groups (1, 2, 3, 4, 5, 7, 8) are available
