Revised by R. Robinson
Issue AV1.13 8 June 2006
22
Range =
(0 ~ 2)
This Zone can override the restriction applied by
for CO access by the Station.
0 = Disable
restriction.
1 = Outgoing calls, by pressing DSS CO keys, are restricted to the access assigned in
2 = The station can answer or pickup the incoming line according to
and
Related Zones.
Zone 223
Auto-Redial TIMES
Default value =
20
Range =
(00 ~ 99)
This Zone sets the number of attempts that Auto-redial will use.
Related Zones.
,
Zone 224
Limit Call CODE
Default value =
2
Range =
(0 ~ 8)
This Zone determines the warning method used by the system when call limiting is applied in
0 = A 1 second warning beep is followed 5 seconds later by five 1 second beeps when the time set in
is reached and the call continues.
1 = A 1 second warning tone is followed 5 seconds later by 5 seconds of beeps. This is repeated every time the
setting in
has expired and the call continues.
2 = At 10 seconds before the setting in
, a warning tone will be heard. This is followed by a
continuous beeping 5 seconds later (this will be heard only by the internal party unless it is an SLT, in
which case both parties will hear the tone). When the
time has expired, the call will be
released.
3 = This is the same as in 2. With the exception that both parties will hear the tone.
4 = Reserved
5 = Same as in 0, but applies for incoming as well as outgoing.
6 = Same as in 1, but applies for incoming as well as outgoing.
7 = Same as in 2, but applies for incoming as well as outgoing.
8 = Same as in 3, but applies for incoming as well as outgoing.
9 = Reserved.
Related Zones.
Zone 225
Speed Dial
Default value =
0
Range =
(0 ~ 9)
This Zone allocates the amount of system and individual speed dial numbers as set out in the table below:
(NAME SPEED DIAL) IS DISABLED. Ie.:
AV8, AV12, AV16, AV20, AV24, AV38
ZONE
SETTING
VALUE
SYSTEM
SPEED DIAL
SETS
INDIVIDUAL
SPEED DIAL
SETS
0 100
(100~199)
580
1 200
(100~299)
480
2 300
(100~399)
380
3
400 (100~499)
280
4
500 (100~599)
180
5 600
(100~699)
80
6,7,8,9
SAME AS 5
SAME AS 5
NOTES:
IF LCR IS ENABLED IN
, THIS ZONE MUST BE GREATER THAN 0 OR
ONLY THE FIRST 50 SPEED DIAL CODES WILL BE AVAILABLE.
