2 — English
IMPORTANT SAFETY INSTRUCTIONS
Exercise caution to avoid slipping or falling.
Use only recommended accessories.
The use of
improper accessories may cause risk of injury.
Never leave product running unattended. Turn pump
and water faucet completely off and disconnect pump
from power supply.
Don’t leave product until spray
comes to a complete stop.
Never direct water toward any electrical wiring, the
pump, or other devices.
Ensure that all hoses and accessories are properly
connected before using the product.
ONLY use cold water.
For outdoor use only.
Do not use this misting kit to spray pesticides, liquid
fertilizers, or any other chemicals.
Spraying these
substances could result in serious injury to the operator
or bystanders.
Make sure misting tubes are located so that they will
not be stepped on, tripped over, come in contact with
sharp edges or moving parts or otherwise subjected
to damage or stress.
This will reduce the risk of
accidental falls, which could cause injury, and damage to
the hose and mist tube which could prevent the product
from working properly.
Use caution when positioning the product for use.
Never place the unit near electrical outlets or switches.
Only use nozzles specified by the manufacturer.
Check misting tubes and parts for signs of damage.
Replace any damaged hoses or parts.
Verify that all connections are secure before operating
the unit.
Use caution when using in windy conditions. Winds
may carry mists into electrical wiring or devices.
Save these instructions.
Refer to them frequently and
use them to instruct other users. If you loan someone this
product, loan them these instructions also.
WARNING:
To reduce the risk of injury, user must read and understand
this operator’s manual and the operator’s manual for their
pump before using this misting kit. To reduce the risk of
injury or property damage, ensure proper connection
of all accessories before use. Ensure compatibility and
proper fit before using this misting kit. Turn off the flow
of water to the misting kit before changing or adjusting
accessories. Do not use if a part is broken or appears
to be damaged. For cold water use only. Save these
instructions. Refer to them frequently and use them to
instruct other users. If you loan someone this misting kit,
loan them these instructions also.
WARNING:
This misting kit is only intended for use with high pressure
pumps and connection hoses that are designed for high
pressure misting kits. Do not use a pump that has a
pressure rating greater than 1,000 PSI and a flow rate
of 1.0 gallons per minute. Contact the manufacturer
of the high pressure pump to determine the properly
rated connection hose for use with this pump. Use with
any other pumps or connection hoses can damage the
misting kit and result in possible serious personal injury
and/or property damage.
WARNING:
READ AND UNDERSTAND ALL INSTRUCTIONS
.
Failure to follow all instructions listed below, may result
in electric shock, fire and/or serious personal injury.
To reduce the risk of injury,
close supervision is
necessary when a product is used near children.
Always wear eye protection with side shields marked
to comply with ANSI Z87.1 when installing this misting
kit.
