8 — English
This product has a one year Limited Warranty.
For Warranty details go to www.arcticcove.com
ACCESSORIES
TROUBLESHOOTING
To order these accessories, call 1-877-297-8911
High Pressure Misting Nozzle (5pk.) .................................................................................................... Model No. MAC810
Slip Lock End Plug (3/8 in.).................................................................................................................. Model No. MAC820
Slip Lock Connector (3/8 in.) ............................................................................................................... Model No. MAC830
Slip Lock Connector with Nozzle (3/8 in.) ............................................................................................ Model No. MAC840
Slip Lock T-Connector (3/8 in.) ............................................................................................................ Model No. MAC850
Slip Lock Elbow Connector (3/8 in.) .................................................................................................... Model No. MAC860
2 ft. Steel Misting Tubes (3/8 in.) [3pk.] ............................................................................................... Model No. MAC870
6 ft. Steel Misting Tubes (3/8 in.) ......................................................................................................... Model No. MAC880
6 ft. Stainless Steel Tube with Nozzles (3/8 in.) ................................................................................... Model No. MAC890
Nozzle Cleaner .................................................................................................................................. Model No. MACC008
WARNING:
Current attachments and accessories available for use with this product are listed above. Do not use any attachments
or accessories not recommended by the manufacturer of this product. The use of attachments or accessories not
recommended can result in serious personal injury.
PROBLEM
POSSIBLE CAUSE
SOLUTION
Leak at nozzle, threaded hole, or
connection
Nozzles were installed improperly.
Nozzles clogged or dirty.
Misting tubes connected improperly.
Reinstall nozzles and tighten securely.
Clean nozzles.
Reconnect misting tubes.
Misting kit will not spray
Pump is off.
Pump isn’t functioning properly.
Nozzles clogged or dirty.
Turn pump on.
Refer to maintenance information in
the operator’s manual for the pump.
Clean nozzles.
Loss of pressure
Debris in misting kit.
Leak in misting tube.
Follow instructions for flushing the
system in
Assembly.
Locate and replace leaking misting
tube.
Water stuck in misting tube assembly
after use
Misting tube assembly connected to
hose adaptor.
Defective drain valve.
Disconnect misting tube assembly
from hose adaptor and allow water
to drain.
Replace drain valve.
