AQUARIUS ULTIMA, Инструкция по эксплуатации

Страница: 7 / 28

7
Accessories and Spare Parts
Reagents
AS1413 -1413 µcm conductivity solution
AS7004 - pH 4 buffer solution
AS7007 - pH 7 buffer solution
AS5475 - 475 mV ORP solution
AS4250 - pH 4.01/250 mV combo solution
Sensor s
PR_FCT – Combination Conductivity, Flow and Temperature Sensor.
PR_pHRG – Combination pH, ORP and Ground reference Sensor
Peristaltic Pumps
AP_PERI_S_KIT – AP PERI SERVICE KIT (Maximum service interval - 12 months). Included in
this Kit are the following
• AP_TUBE4824 (1)
• AP_INJECT (1)
• TUBESUCTION (2 mt)
• TUBEDISCHARGE (2 mt)
AP_PERI_O_KIT – AP PERI OVERHAUL KIT (Maximum service interval - 2 years)
Included in this Kit are the following
• AP_TUBE4824 (1)
• AP_INJECT (1)
• AP_ROLLBLOCK (1)
• AP_DWEIGHT (1)
• AP_LID (1)
• TUBESUCTION (2 mt)
• TUBEDISCHARGE (2 mt)
Routine Testing
The use of an Aquarius control system will automatically vary the dosages and maintain
good conductivity, ORP and pH control, even where there are wide fluctuations in system load
or demand. The principles of “Best Practice” and “Duty of Care” that are the responsibility of the
system owner dictate that all systems should be routinely serviced and tested chemically and
the results logged.
Regular Inspections and Maintenance
For optimum results and continued accuracy, the complete operation of the controller system
should be verified at least on a monthly service basis.
All sensors should be inspected, cleaned and calibrated as necessary every month.
All sensors age with time and temperature, and have a typical life span of 12-36 months
depending on the application in which they are operating and should be replaced accordingly.
Where fitted, flow sensors and wire strainers should be checked for correct operation and
cleaned of any debris every month so they work efficiently.
Injection non-return valves and pumps should be cleaned and checked at least monthly.