AQUARIUS ULTIMA, Инструкция по эксплуатации

Страница: 10 / 28

10
The Probe-board is located above the protection cover on the bottom left hand corner of the
controller.
The diagrams below show the connections to the Ultima Probe-board circuitry:
1 – Power cable connector between Probe board and Motherboard
2 – BNC pH connector (if fitted)
3 – BNC ORP connector (if fitted)
4 – Combination Probe (PR_PHRG) connector
5 – FCT probe (PR_FCT) connector
6 – FAC probe connector
7 – Dip switches for FAC Probe Gain regulation
8 – 4-20mA connector and Water meter connector
9 – 5 x Analogue inputs
10 – 3 x 5V DC and 2 x 12V DC power supply connectors
11 – 5 x jumpers for tank alarm sensors connected to the analogue inputs