AQUAPHOR APRO 1000 LPH, Руководство пользователя

Страница: 27 / 83

27
aquaphor-pro.com TP-APRO-WH-R03
7. CONFIGURATION
APRO WH 1000 LPH system can be configured in two ways:
▪
By using the three-button keyboard of the controller.
▪
By using the APRO Monitor application on the screen of a mobile device.
7.1 STARTING
7.1.1 CONNECTION
CAUTION: It is recommended to use eyes and hands protection while unpacking the system.
1. Unpack the system and place it to the permanent place of work.
2. Make sure the membranes and filter cartridges are installed.
3. Connect the inlet connection to the raw water supply.
4. Connect the electricity plug to ~220 V.
5. Connect the dosing suction pipe to the antiscalant tank.
6. Before starting work, move RO switcher to the AUTO position, make sure to perform degassing (Check 10.1 Dosing
pump degassing)
7. Connect permeate connector to the permeate supply line.
8. System is ready.
If an additional atmospheric permeate tank is used, connect the permeate line via float switch. If a permeate supply pump
(P-04) is used, connect the low level switch (LLS-03) to the control panel.