AQUAPHOR APRO 1000 LPH, Руководство пользователя

Страница: 51 / 83

51
8.12 ALARM-12: HIGH FEED CONDUCTIVITY
The error occurs when the pump of the RO system P-03 is working, and the high feed conductivity of the raw
water of the RO system is greater than the set value for 5 minutes . After a problem occurs, the system will try
to restart it again. If the problem persists, the osmosis system will stop until the problem is resolved.
8.14 ALARM-14: FEEDPRESSURE SENSOR
The error occurs when the feed pressure value is lower than the set value ( Setup-17 ) for 5 minutes .
8.15 ALARM-15: INLET PRESSURE SENSOR
The error occurs when the inlet pressure value is lower than the set value ( Setup-18 ) for 5 minutes .
8.16 ALARM-16: RO PRESSURE SENSOR
The error occurs when the RO pressure value is higher than the set value ( Setup-19 ) for 5 minutes .
Solution: The system can be reset manually by pressing the reset but-
ton or by the automatic resetting every three hours. Check the raw wa-
ter supply quality, functionality of
ECT-02 and pretreatment system
Solution: Check the sensor and cable connection. If there is an error
after checking, then replace the sensor.
Solution: Check the sensor and cable connection. If there is an error
after checking, then replace the sensor.
Solution: Check the sensor and cable connection. If there is an error
after checking, then replace the sensor.