AQUAPHOR APRO 1000 LPH, Руководство пользователя

Страница: 32 / 83

32
7.6 EQUIPMENT SETUP
1.
Move the switch to the OFF position to start setting up the system.
2.
Perform dosing pump degassing ( Maintenance, 10.1 ).
3.
Make sure there is no leakage.
4.
Check all the setups and programs ( 7.3, 7.4 ).
5. Whenever the low level sensor is off, it is recommended to perform P-04 deaeration ( Maintenance, 10.1 ).
7.6.1 EXAMPLE OF SOFTWARE SETUP
1. To enter the settings menu, use the controller's three-button keyboard located under the monitor screen.
2.
To open Configuration menu, press the
“Ok” ▀ and “Down” ▼ buttons.
3.
If you want to add or exclude an element from the system, press the
“Up” ▲ button. By pressing the “Ok” ▀
button, we confirm the selection and proceed to the next element of the system.