AQUAPHOR APRO 1000 LPH, Руководство пользователя

Страница: 50 / 83

50
8.9 ALARM-09: MINIMUM PERMEATE FLOW
The error occurs when the pump of the RO system (P-01) is running, and the osmosis system permeate flow value
is less than the set value ( Setup-14 ) for 5 minutes . After a problem occurs, the system will try to restart again. If
the problem persists, the osmosis system will stop until the problem is resolved.
8.10 ALARM-10: MINIMUM CONCENTRATE FLOW
The error occurs when the option is activated, the RO system is running, the system is not in flushing mode or CIP,
and
the osmosis system permeate flow value is less than the set value ( Setup-14 ) for 5 minutes. After a problem
occurs, the system will try to restart again. If the problem persists, the osmosis system will stop until the problem is
resolved.
8.11 ALARM-11: LOW PERMEATE LEVEL
The error occurs when there is no signal from the LLS-03 low water level sensor in the T-03 permeate tank for
20 minutes.
Solution: The system can be reset manually by pressing the reset button or
by automatic reset every three hours. Check the functionality of FT-01. Per-
form CIP, or change the membrane.
Solution: The system can be reset manually by pressing the reset button
or by automatic reset every three hours. Check the functionality of the
concentrate sensor and automatic concentrate valve XV-04.
Solution: The error is fixed when a signal from the low water level sen-
sor is received (when the permeate will be present in the tank).