AQUAPHOR APRO 1000 LPH, Руководство пользователя

Страница: 25 / 83

25
aquaphor-pro.com TP-APRO-WH-R03
6.2 GENERAL POINTERS
ATTENTION: Contamination of the unit coming from the
drain
, Blocking of the module
▪
Do not lead the concentrate line directly in the drain, but fasten it
approx. 10 - 15 cm over the drain with appropriate means.
ATTENTION: Corrosion; Destruction of the lines
▪
Use corrosion-resistant material for all the water lines
6.3 WATER CONNECTION
Install a pressure resistant hose between the outlet of the softening installation and the raw water connection of the reverse
osmosis unit.
ATTENTION: Contamination of the unit coming from the
drain
, Blocking of the module
▪
Do not lead the concentrate line directly in the drain, but fasten it
approx. 10 - 15 cm over the drain with appropriate means.
INSTALLATION
➢
Concentrate connection: Install a hose between the concentrate outlet of the reverse osmosis unit and the sewer
junction and let it hang 10 to 15 cm over the drain, to prevent the contamination of the unit.
➢
Permeate connection: Install a hose temporarily between the outlet for permeate of the reverse osmosis unit
and the sewer junction.
1. System Location
The RO system should be located away from direct sunlight, wind and rain. You should also account for freezing tem-
peratures and remember that lower temperatures reduce production. It would also be wise to leave plenty of room
around the unit for future service.
2. Plumbing
The high-pressure pumps that feed the RO unit require a constant flow of water at a sufficient flow rate.
3. Feed Water
Piping for the feed water should be either copper or plastic as iron or carbon steel pipe could increase the iron content
of the feed water. Temperature of the feed water should not exceed 35° C. This unit comes equipped with pressure