APV ZS 200 M4, Оригинальная инструкция по эксплуатации

Страница: 11 / 40

11
QUALITY FOR PROFESSIONALS
Surface area calculation
Working width:
12.6m
Drive speed:
10km/h
To the main menu
Calibration test
Speed:
1350
Slide valve:
25
Start test?
Test running!
OK
6.2 Surface area calculation
Note: The surface area is only captured, when spread material is distributed.
In the following submenu items, you can enter the
working width and drive speed. You can read off the
surface area in the menu item Day counter.
Put in the working width here.
Select the drive speed.
The display jumps to the main menu.
6.3 Calibration test
This is where you can configure the settings for the
slide valve and for speed, as well as start the test.
By means of the setting chart, the following items must be entered for the
calibration test, by using:
Enter the speed as per the setting chart.
This is where you can select the slide valve
opening.
If all values are correctly set, start the test.
Indicates that the calibration test has finished.
The display then returns to the main menu.