APV ZS 200 M4, Оригинальная инструкция по эксплуатации

Страница: 6 / 40

6
QUALITY FOR PROFESSIONALS
5.2 Attaching to the tractor
For this type of attachment, screw the
tractor drawbar between your ZS 200
M4 and the counter plate provided in
the scope of delivery. You should use
screws with a diameter of 10mm.
Screw the top link bracket to the top link plate and fix the top link of your tractor with
the pin.
5.3 Mounting on an attachment
In order to extend the ZS 200 M4 with an
attachment, the best way is to use the counter
plate. Use this to secure your ZS 200 M4 to a
frame on the attachment.
CAUTION: Please note that the sowing height
(installation height of the ZS 200 M4 must be at
least 1.5m from the ground) of the seed has an
influence on the spreading width. This is a key
consideration, particularly when it comes to very
large working widths.
5.4 Fastening the control box
Fasten the standard holder (provided in the scope of
delivery) in the cab by using two screws. Store excess
cable in the driver's cab to avoid clamping it.
TIP: Pay attention to the angle at which you view the
module to ensure optimum readability of the display.
You might have to bend the bracket slightly to set the
correct angle.
Fig.: 2
Fig.: 4
Fig.: 3
Fig.: 1