APV ZS 200 M4, Оригинальная инструкция по эксплуатации

Страница: 27 / 40

27
QUALITY FOR PROFESSIONALS
10 Maintenance and care
10.1 General information
In order to maintain the device in good condition after many hours of operation,
please always observe the following instructions:
Basic safety instructions for maintenance are included in the "For your safety..."
enclosure.
Original parts and accessories have been specially designed for the machines or
devices.
We draw express attention to the fact that original parts and accessories, which we
have not delivered, have neither been checked and approved for use by us.
Under certain circumstances, the installation and/or use of such products may
negatively change or impact on the stipulated design characteristics of your device.
The manufacturer is not liable for damage caused by use of non-original parts and
accessories.
Unauthorised modifications, as well as the use of parts and attachments on the
machines, void the liability of the manufacturer.
Re-tighten all screw connections at the latest after 3 operating hours and again after
approx. 20 operating hours, and check them regularly thereafter. (Loose screws may
result in serious damage which is not covered by warranty).
Paint damage may occur when cleaning at too high pressure.
During winter, protect the device from rust by using an environmentally-friendly
agent.
Park the device in a weather-proof area.
Do not use water to clean the device. We recommend using compressed air to clean
this device
10.2 Location of the type plate
The type plate is located (viewed from the front) on the right-hand side of the
machine.
When asking questions or for
guarantee claims, please always
specify your machine's
production number.
Fig.: 16