Apollo RoadRunner MRH16, Руководство по эксплуатации

Страница: 48 / 69

Operating Manual
40
Freeze
Sequence
Camera Menu
Alarm Reset
Panic
Setup
Search Mode
Login/Logout
Figure 56 — Live Monitoring menu.
Live Monitoring Menu
Freeze
Selecting (Freeze) in the Live Monitoring menu will freeze the current image on the screen until you select again.
While in the Freeze mode, the icon displays in bottom-left corner if
Freeze
is selected in the Display setup screen
(OSD tab).
Sequence
Selecting (Sequence) in the Live Monitoring menu causes the cameras to display sequentially. When in one of the
multi-view formats, pressing this button will cause the DVR to go through predefined screen layouts (Full Sequence).
Or, the bottom, right screen will display live cameras sequentially (Cameo Sequence). For example, if you select
(Sequence) in the 2x2 format, the DVR changes pages as follows:
< Full Sequence >
< Cameo Sequence >
Selecting again exits the Sequence mode. While in the Sequence mode, the icon displays in bottom-left corner
if Sequence is selected in the Display setup screen (OSD tab). If all the cameras in a page are Off, or have lost video
or are set to Covert (unless the user has authority to view covert cameras), that page will be excluded from the sequence.
NOTE: The Full Sequence for the full sequence monitoring and the Cameo Sequence for the cameo sequence
monitoring should be selected in the Display setup screen (Main Monitor tab).
Camera Menu
Selecting (Camera Menu) in the Live Monitoring menu displays the following Camera Menu.

PTZ:
Selecting
PTZ
and choosing the camera number allows you to control the selected camera as
long as it has Pan, Tilt and Zoom capabilities. Refer to the following PTZ Mode section for details.

Zoom:
Selecting
Zoom
and choosing the camera number zooms the current image of the selected
camera on the screen. Selecting
Zoom
again in the Camera Menu again exits the Zoom mode. Refer
to the following Zoom Mode section for details.