Mobile Digital Video Recorder
9
Chapter 3 — Configuration
NOTE: Your DVR should be completely installed before proceeding. Refer to Chapter 2 — Installation.
Front Panel Controls
Removable HDD
Power Switch
USB Port
Power LED
Record LED
Figure 4 — DVR front panel.
Removable HDD
The hard disk drive can be removed to view the video on the personal computer or on another DVR. Remove the hard
disk drive after the unit turns off. The Power Switch must be in the Off position to remove the drive. Refer to the
Appendix – Playback on PC with USB Interface
for details of playing back images on the personal computer.
Power Switch
The unit can be turned on or off with the key provided with the unit.
USB Port
Two USB ports on the front panel are provided to connect external hard disk or flash drives for video clip copying or
system upgrades. Position external drives close enough to the DVR so that you can make the cable connections, usually
less than 6 feet. Use the USB cable provided with the hard disk drive to connect it to the DVR.
A USB mouse (not supplied) can be connected to one of the ports. You can use the mouse to configure DVR settings.
A USB to Serial converter can be connected to the USB port. Multiple text-in devices can be used with a USB to Serial
converter.
Power LED
The Power LED is lit when the unit is On.
Record LED
The Record LED blinks when the DVR is recording or searching video on the hard disk drive.
Содержание RoadRunner MRH16
