Apollo RoadRunner MRH16, Руководство по эксплуатации

Страница: 31 / 69

Mobile Digital Video Recorder
23
You can assign IDs to each camera by selecting the box under the
ID
heading. Change the number by selecting it and
using the Up and Down arrows to increase and decrease the number. The PTZ ID number can be set from 0 to 256.
Select the
Setup…
box, and the Port Setup window appears.
Configure the port’s setting based on the PTZ camera manufacturer’s instructions.
Audio
PATH: Devices menu > Audio
The DVR can record up to two audio inputs. Select the box
beside the input. A list of cameras appears, and you can select
which camera you want associated with that audio input. You
cannot associate the same camera with two audio inputs.
Selecting
Enable Audio-Out
toggles between enabling and
disabling audio out.
Figure 27 — Audio setup screen.
Alarm-Out Screen
PATH: Devices menu > Alarm-Out > Settings tab
Each alarm output can be given its own title by selecting the
box under the
Title
heading. A virtual keyboard appears
allowing you to enter the title.
Selecting the box under the
Type
heading allows to set the
alarm output for NO or NC (normally open or normally closed).
Selecting the box beside
Dwell Time
allows you to set the
dwell time of the alarm output. Dwell times range from 5
seconds to 30 minutes.
Figure 28 — Alarm-Out Settings screen.