Apollo RoadRunner MRH16, Руководство по эксплуатации

Страница: 47 / 69

Mobile Digital Video Recorder
39
Chapter 4 — Operation
NOTE: This chapter assumes your DVR has been installed and configured. If it has not, please refer to Chapters
2 and 3.
The main functions of DVR are recording and playing back video. However, you have much greater control over recording
and playing back video. You can establish recording schedules based on time of day and day of the week. The DVR
allows you to search through the recorded video using sophisticated tools. It also supports remote control and viewing,
and recording video at the same time you are watching previously recorded video.
A USB mouse (not supplied) will be used to control the operation. You can use a USB mouse to navigate through the
menus much like you would on a computer.
Turning on the Power
The DVR can be turned on by inserting the key in the On/Off switch and rotating it clockwise. The switch can be left
in the On position and the key removed. This way the DVR will power up when the ignition is turned. The DVR is
operational in approximately 60 seconds after the ignition switch is turned on. The DVR will be operational in 30 minutes
after the ignition switch is turned on if the
30 minutes when the Use 30 seconds Delayed Start
feature is turned on.
The Power LED on the front panel will illuminate, and this action signifies the DVR has been turned on properly.
NOTE: Check the heater power connector is connected to the DVR. If the temperature is on 32°F (0°C) or lower,
the DVR does not boot and the heater will operate to increase the temperature until the temperature
goes up to 32°F (0°C) and the DVR boots. Refer to Chapter 2 — Installation for details.
Turning off the Power
The DVR can be turned off by rotating the key counter-clockwise to the Off position. The DVR will be turned off
after the ignition off timeout if the ignition off timeout feature is set to On (Path:
System
menu >
Power Management
).
You also can shutdown the unit by selecting
Shutdown
in the System menu. When you turn the key to the Off position
or the engine is turned off, it takes maximum 20 seconds to turn down the unit after the shut down message appears.
When you turn the unit off by selecting
Shutdown
in the System menu, the unit turns down in 6 seconds after the
shutdown message appears.
Live Monitoring
As soon as the DVR completes its initialization process, it will begin showing live video on the attached monitor and
playing live audio through the attached speaker. The default mode is to display all cameras at once. Clicking any
camera screen will cause that camera to display full screen. It displays live video and plays live audio until the user
enters another mode.
While in the live monitoring mode, move the mouse pointer to the top of the screen displays the following Live Monitoring
menu. You can select menus and items by clicking the left mouse button.