Apollo RoadRunner MRH16, Руководство по эксплуатации

Страница: 28 / 69

Operating Manual
20
Selecting
ADSL (with PPPoE)
allows you to set up the ADSL
network.
Select the box beside
ID
, and a virtual keyboard appears
allowing you to enter the ID for ADSL connection.
Select the box beside
Password
, and
a
virtual keyboard
appears allowing you to enter the password for ADSL
connection.
NOTE: Entering the ID and Password and selecting OK reads the current IP address of the DVR configured by
the ADSL network.
If the DVR is configured for DHCP or an ADSL network, the IP address of the DVR might change whenever
the unit is turned on.
PATH: Network menu > Network > DVRNS tab
Select
Use DVR Name Service
to toggle between On and
Off.
NOTE: The DVRNS (DVR Name Service) allows the DVR to
use Dynamic IP addresses for remote connection.
When this feature is On, you can access your DVR
remotely using the DVR name instead of its IP
address. For the DVRNS feature, the DVR should
be registered on the DVRNS server.
Select the box beside
DVRNS Server
, and a virtual keyboard
appears allowing you to enter the IP address or domain name
of the DVRNS server.
Figure 21 — DVRNS setup screen.
NOTE: You will need to get the IP Address or domain name of the DVRNS Server from your network administrator.
You can use the domain name instead of IP address if you already set up the DNS Server when setting
up the LAN.
Select the box beside
Port
and set the port number of the DVRNS server by using the Up and Down arrows to increase
or decrease the numbers.
Select
Use NAT
to toggle between On and Off.
NOTE: When using the NAT (Network Address Translation) device, refer to the NAT manufacturer’s instructions
for the proper network settings.
Select the box beside
DVR Name
, and a virtual keyboard appears allowing you to enter the DVR name to be registered
on the DVRNS server.
Select the
Check
box to check whether or not the name you entered can be used.
NOTE: The DVR name you entered should be checked by selecting Check, otherwise the DVRNS changes will
not be saved.
When entering no name or a name already registered on the DVRNS server, an error message displays.
Selecting
Save
registers the DVR on the DVRNS server. Proper DVRNS settings will display the help desk information
of the DVRNS server in the box beside
Help Desk
.