Apollo RoadRunner MRH16, Руководство по эксплуатации

Страница: 46 / 69

Operating Manual
38
PATH: Event menu > System Event > Actions tab
Figure 54 — System Event Actions screen
The DVR can be set to react to system events. System events
can be associated with an Alarm-Out connector, and/or notify
a number of different devices.
Select the
Alarm-Out
box beside the desired event (
Check
Recording
,
Check Alarm-In
,
Disk Almost Full
,
Disk Full
,
Disk Bad
,
Disk Temperature
, or
Disk S.M.A.R.T.
), and
a list of Alarm Outputs appears. You can associate as many
Alarm-Outs with the Event as you wish. If the DVR detects
that event, it triggers output signals on all the associated
Alarm-Out connectors.
NOTE: Alarm-Out action cannot be set to System and
Panic Record events.
Select the
Notify
box beside the desired event (
System
,
Panic Record
,
Check Recording
,
Check Alarm-In
,
Disk
Almost Full
,
Disk Full
,
Disk Bad
,
Disk Temperature
, or
Disk S.M.A.R.T.
). You can toggle the entire list On and
Off by selecting
Notification
. You can toggle the individual items On and Off by selecting that item. Select
OK
to
accept your changes.
NOTE: Mail notify is the only option available for the System event.
For the Notify action to work, the DVR should be registered in the RAS (Remote Administration System).
Event Status
PATH: Event menu > Event Status > Event Status tab
Figure 55 — Event Status screen.
The Event Status screen displays the status of the DVR’s
systems and inputs. Events will be highlighted, and related
channels or events will flicker for five seconds when detected.
(Alarm-In), (Motion), (Video Loss), (Video Blind)
and (Text-In) will be highlighted when each event is
detected based on the settings you made in the Alarm-In,
Motion Detection, Video Loss, Video Blind and Text-In setup
screen on the Event menu.
(Check Alarm-In) and
Check Recording
will be
highlighted when each event is detected based on the settings
you made in the System Event setup screen on the Event menu.
Panic Record
will be highlighted while the DVR is in the panic recording mode.
Disk Almost Full
will be highlighted when the DVR is not in the Recycle mode and the level of disk usage reaches
the Disk Almost Full percentage you made in the System Event setup screen on the Event menu.
Disk Full
will be
highlighted when the DVR is not in the Recycle mode and all available storage space has been used.
Fan Error
will be highlighted when the cooling fan to the left of the power cord on the rear panel is not working for
more than four seconds.
Selecting the
Storage
tab will display the hard disk drive status. Refer to the
Storage
section for details.