Apollo RoadRunner MRH16, Руководство по эксплуатации

Страница: 37 / 69

Mobile Digital Video Recorder
29
You can set the ips, Quality and Resolution (ips, Quality,
Resolution and Dwell for Advanced Mode setup) of the
recording for any modes you set up in the Mode column. If
you do not set the ips, Quality, Resolution and Dwell in the
Settings column, the DVR will follow the default settings.
See below for details.
NOTE: Descriptions of the Record icons in the Type
column are as follows:
Time-lapse (Time) Alarm-In
Motion Video Loss
Video Blind Text-In
Figure 38 — Schedule – Settings (Advanced Mode) setup screen.
NOTE: Channels that are not defined will use the setting values of the previous schedule item.
When multiple events are detected at the same time from a specific channel, the DVR will record event
video with the high setting values if the ips, Quality, Resolution and Dwell values of events are different
from each other. However, the ips will be reset to the supported maximum value when the ips, Quality,
Resolution and Dwell are all set to the highest value. (Advanced Mode Only)
Select the box under the heading to delete the recording settings. You will be asked to confirm that you want to delete
the settings.
Select
Default…
, and the Default screen appears.
Selecting boxes under
ips
allows you to set the images per second
for Time and Event recording. You can select from 1.00 to
30.00 ips (25.00 ips PAL).
Selecting boxes under
Quality
allows you to set the recorded image
quality for Time and Event recording. You can select from:
Very
High
,
High
,
Standard
and
Basic
.
Selecting boxes under
Resolution
allows you to set the recorded image resolution for Time and Event recording. You
can select from:
Very High (D1)
,
High (Half D1)
and
Standard (CIF)
.
Selecting boxes under
Dwell
allows you to set the length of time you would like to record for the associated event.
(Advanced Mode Only)
Pre-Event
PATH: Record menu > Pre-Event
If you do not have Event set up in the Record Schedule, a message will display alerting you to this fact.
Figure 39 — Pre-Event setup screen.
When the DVR is in the Event Record mode it is possible to
have it record images before the event occurs. The
Pre-Event
screen allows you to define how to handle pre-event recording.
You can turn individual cameras On or Off for pre-event
recording. The image speed can be set from 1.00 to 30.00 ips
(25.00 ips PAL), image quality can be selectable from
Very
High, High
,
Standard
and
Basic
, and image resolution can
be selectable
from Very High (D1)
,
High (Half D1)
and
Standard (CIF)
.
You can set the amount of time to record prior to the event
by adjusting the
Dwell
. You can set the
Dwell
from 5 seconds
to 30 minutes. The longer the dwell set, the fewer maximum
ips can be set.