Apollo RoadRunner MRH16, Руководство по эксплуатации

Страница: 22 / 69

Operating Manual
14
You can set up holidays by selecting
+
. The current date
appears.
Select the month and day and change them by using the Up
and Down arrows. Dates can be deleted by selecting the
beside the date.
NOTE: Holidays that do not fall on the same date each
year should be updated once the current year’s
holiday has passed.
Figure 10 — Holiday setup screen.
PATH: System menu > Date/Time > Time Sync. tab
You can set up time synchronization between the DVR and standard time servers that are available in most time zones
and countries, or between the DVR and another DVR.
Figure 11 — Time Sync. screen.
Selecting the box beside
Automatic Sync.
toggles between
On
and
Off
.
Select the box beside
Time Server
, and a virtual keyboard
appears that you can use to enter the IP address or domain
name of the time server.
NOTE: You can use the domain name instead of IP address
if you already set up the DNS Server when setting
up the LAN.
Select the box beside
Interval
and set the time interval for
synchronization from 30 minutes to 1 day at various time
intervals.
Last Sync-Time
displays the last time the DVR was synchronized with the time server.
Selecting
Run as Server
toggles between
On
and
Off
. When it is
On
, the DVR you are setting up will run as a time
server.
Storage
PATH: System menu > Storage > Information tab
The information in the
Type
column describes the storage
device.
The capacity of the storage device is displayed in the
Capacity
column.
The
Format
column displays whether the device is used for
recording (
Record
) or not (
Not Using
).
Not formatted
indicates the device is not formatted. indicates when the
device has temporary space set aside so that video clips can
be saved on a DVD RW.
Figure 12 — Storage Information screen.