Apollo RoadRunner MRH16, Руководство по эксплуатации

Страница: 34 / 69

Operating Manual
26
GPS
PATH: Devices menu > GPS
Figure 33 — GPS setup screen.
Select the box beside
Port
and select from None, RS232 1,
RS232 2 and RS485. If the RS232 ports and RS485 port are
in use for PTZ control, networking, text input or remote
control, the GPS cannot be configured.
Select
Setup…
and select the correct Baud Rate, Parity, Data
Bits and Stop Bits for the device you are connecting to the
DVR. Use the GPS
manufacturer’s recommended settings
when configuring the RS232 or RS485 ports.
Selecting
Enable Recording
toggles On and Off. When set
to On, the DVR will record images with GPS information.
Selecting
Use GPS Time Sync
toggles On and Off. When
set to On, the DVR will synchronize the time to the GPS
satellite in the interval of 1 hour.
Select the box beside
Speed Unit
and select the unit of measure for the display speed between
km/h
and
mph
when
displaying GPS speed on the screen.
Selecting
Save
displays the GPS information box on the screen while the GPS receiver receives
satellite data. You can change the position of GPS information box by clicking the bar on the
top of the box and dragging it to where you want it located on the screen.
Recording Setup
Figure 34— Record menu.
Record
PATH: Record menu > Record > Settings tab
Figure 35 — Record Settings screen.
Selecting
Recycle
toggles between On and Off. In the
Recycle mode, the DVR records over the oldest video data
once all available storage space has been used. When Recycle
is turned off, the DVR stops recording once all available
storage space has been used.
Select the
Event Record Dwell
box and set the length of time
you would like to record for the associated event. You can
set the dwell from 5 seconds to 30 minutes. Refer to
Event
Actions screen in this chapter for information regarding event
recording.
Selecting
De-Interlace
toggles between On and Off. When
set to
On
, the DVR will turn the de-interlace filter on while
recording video with Very High (D1) resolution.