AQUAKOND AKY
CONDENSING BOILER
17
code HC0048.10GB ed.B-1811
AKY
ON/OFF boiler
switch
Reset button
Lockout
indicator
light
The boiler is supplied without remote control and/or ambient
thermostat as it can operate with different remote controls, some
of which are supplied by APEN GROUP as accessories, whilst
others are commercially available.
Operating modes:
A) ordinary thermostat, or chronothermostat, with a clean digital
contact to be connected to the boiler ID2/IDC2 terminals;
B) SmartEASY/WEB code G23500/G23700.
This manual will describe "A” operation, providing information
about Aquakond system modes. Instructions on how to operate
the SmartEASY/WEB chronothermostats can be found in
manuals supplied with the accessory.
Equipment main functions
The system is equipped with the following functions:
•
Circulator anti-lock and variable speed;
•
Antifreeze.
A operation: ordinary remote control
The Customer must install a chronothermostat or an ambient
thermostat with a voltage free dry contact, between ID2/IDC2
terminals; the boiler will switch on when the contact is open and it
will switch off when the contact is closed. The modulation occurs
on the delivery water temperature, which remains fixed to the
factory value pre-set to 72°C. When several ambient units are
connected and one of them is turned off, the boiler automatically
reduces the heat output while keeping the delivery temperature
fixed. Boiler lockout and reset, available inside it, can be remotely
indicated with the APEN remote control code C09660.
3.6. Operation and accessories
The boiler is fitted as standard
with a multifunction LCD
panel located inside it, and
is used to control, configure
and diagnose all operating
parameters of the equipment.
The "LCD control” paragraph
explains its operation.
This panel cannot be remotely
controlled.
Ambient Temperature
adjustment
Operation B: G23500/G23700 SmartEASY/WEB
SmartEASY/WEB touchscreen control has been designed to
control several ApenGroup equipment for heating, ventilation
and cooling.
The control facilitates programming when several systems are
installed (possibility to connect up to 32 systems), allows to have
a view of the whole system, to reset the systems directly from
the panel, as well as to control and manage lockouts.
Main features:
•
Simultaneous management of all devices connected to it
(switching on and switching off)
•
Simplified connection by means of two polarised cables
and two power cables
•
A temperature probe installed on the control
•
Possibility to connect up to three remote temperature probes
•
Multilingual 4.3” touchscreen colour display
•
Complete management of the operating parameters
•
Built-in or flush with the wall installation
•
In the SMART WEB version, complete management of the
control and its functions through the network
For operating instructions and installation diagrams, please
refer to the manual of SmartEASY/WEB control.
