ANYHZ FST-500 Series, Руководство пользователя

Страница: 92 / 151

FST 500 Manual
- Page 92 -
}else{
reg_crc=reg_crc >>1;
}}}
return reg_crc;}
3.6 Address list:
The contents of available addresses are shown as below:
Content Address Functions
AC drive
Parameters
00nnH
00 means parameter group, nn means parameter number, for example, the
address of Pr.100 is 0064H. Referencing to chapter 5 for the function of
each parameter. When reading parameter by command code 03H, only
one parameter can be read at one time.
Command
Read/Write
2000H
Bit 0-1
00: No function
01: Stop
10: Run
11: Jog + Run
Bit 2-3 Reserved
Bit 4-5
00: No function
01: FWD
10: REV
11: Change direction
Bit 6-15 Reserved
2001H Freq. command
2002H
Bit 0 1: EF (external fault) on
Bit 1 1: Reset
Bit 2-15 Reserved
Status
monitor
Read only
2100H
Error code:
00: No errors occurred
01: Over-current (oc)
03: Overheat (oH)
04: Drive overload (oL)
05: Motor overload1 (oL1)
06: External fault (EF)
07: CPU failure (cF1)
08: CPU or analog circuit failure (cF3)
09: Hardware protection failure (HPF)