ANYHZ FST-500 Series, Руководство пользователя

Страница: 118 / 151

FST 500 Manual
- Page 118 -
solutions to increase the noise tolerance of an AC motor drive. But this has its limits. Therefore, solving it
from the outside as follows will be the best.
1. Add surge suppressor on the relays and contacts to suppress switching surges.
2. Shorten the wiring length of the control circuit or serial communication and keep them separated
from the power circuit wiring.
3. Comply with the wiring regulations by using shielded wires and isolation amplifiers for long length.
4. The grounding terminal should comply with the local regulations and be grounded independently, i.e.
not to have common ground with electric welding machines and other power equipment.
5. Connect a noise filter at the mains input terminal of the AC motor drive to filter noise from the power
circuit. FST-500 can have a filter as option.
In short, solutions for electromagnetic noise exist of “no product”(disconnect disturbing equipment), “no
spread”(limit emission for disturbing equipment) and “no receive”(enhance immunity).
5.14 Environmental Condition
Since the AC motor drive is an electronic device, you should comply with the environmental conditions.
Here are some remedial measures if necessary.
1. To prevent vibration, the use of anti-vibration dampers is the last choice. Vibrations must be within
the specification. Vibration causes mechanical stress and it should not occur frequently,
continuously or repeatedly to prevent damage to the AC motor drive.
2. Store the AC motor drive in a clean and dry location, free from corrosive fumes/dust to prevent
corrosion and poor contacts. Poor insulation in a humid location can cause shortcircuits. If
necessary, install the AC motor drive in a dust-proof and painted enclosure and in particular
situations, use a completely sealed enclosure.
3. The ambient temperature should be within the specification. Too high or too low temperature will
affect the lifetime and reliability. For semiconductor components, damage will occur once any
specification is out of range. Therefore, it is necessary to periodically check air quality and the
cooling fan and provide extra cooling of necessary. In addition, the microcomputer may not work in
extremely low temperatures, making cabinet heating necessary.
4. Store within a relative humidity range of 0% to 90% and non-condensing environment. Use an air
conditioner and/or exsiccator.