Anthos SMART TOUCH R7, Руководство по эксплуатации

Страница: 63 / 90

63 63 EN
R7
- OPERATING INSTRUCTION
7. Hydrogroup operation
7.1. Fill cup and bowl
The bowl can freely move 305° on the hydrogroup. The bowl may be po-
wered (optional) or can be turned by hand.
The bowl and water to cup spout can be removed to ease cleaning.
Control buttons.
Water to cup button .
Bowl flush button .
Cup sensor.
You can have an optical sensor fitted at the base of the cup fountain, which
detects the cup and automatically activates filling.
The sensor operates as follows:
• 2 seconds after positioning the cup under the fountain, it is filled with
water for 2 seconds (this time is not modifiable)
• Once the cup has been removed, the filling cycle can be repeated only
after 3 seconds
• During the filling cycle, removing the cup and/or pressing the “ CUP
WATER DELIVERY” button, the water delivery cycle will immediately be
interrupted.
NOTE: to disable the cup sensor see paragraph 5.1.1.2.2.2.
Adjusting the amount of water used to fill the cup.
See paragraph 5.1.1.2.2.2.
Adjusting the temperature of the water sent to the cup.
See paragraph 5.1.1.2.2.2.
Setting bowl flushing.
Water can be delivered to the bowl either in manual (with the ON/OFF
button) or timed.
See paragraph 5.1.1.2.2.1. to set the desired mode of operation and water
delivery time.
Setting automatic bowl flushing.
The bowl is automatically flushed in the following cases:
• when button “Water to cup” is pressed,
• when button “Dental chair automatic return” is pressed,
• when button ‘Rinse position” is pressed.
To change operation see paragraph 5.1.1.2.2.1.
Powered bowl movement.
Bowl counter-clockwise button .
Bowl clockwise button .
NOTE:
the bowl can also be moved directly by hand.
Automatic bowl motion (only with powered bowl).
The bowl moves automatically in the following cases:
• press button “Dental chair rinse position”,
NOTE : in this case, the position of the bowl can also be set (see
paragraph 5.1.2.).
• by pressing button “Dental chair reset position”.
See paragraph 5.1.1.2.2.3.for information on how to modify operation.