Anthos SMART TOUCH R7, Руководство по эксплуатации

Страница: 55 / 90

55 55 EN
R7
- OPERATING INSTRUCTION
• Briefly press the foot control to stop from 1 to 16 images divided in 4 pages
on the monitor.
NOTE: The images shown on the monitor by the camera are only
temporarily saved. To permanently save the images, connect the camera
to a PC that complies to standard IEC 60950 which has a USB 2.0 HIGH
SPEED port and image software program.
Camera LED on.
Touching the icon button you can turn the camera LED on and off.
The active mode icon is shown on the TOUCH DISPLAY:
LED off
LED on
If necessary, access brightness adjustment by touching and holding (for at
least 2 seconds) the icon button and then adjust the brightness using
the icon buttons or .
To confirm the brightness selected, exit this submenu by touching the icon
button .
MIRROR function.
By touching the icon button it is possible to move from the real image
view to the mirror one.
The active mode icon is shown on the TOUCH DISPLAY:
Real image
Mirror image
NOTE: This function can only be used in LIVE mode.
Setting operation in single image or multiple image mode.
With the camera activated and in LIVE mode, touching the icon button
you can switch between single image and multiple image mode.
The active mode icon is shown on the TOUCH DISPLAY:
Single image mode active
Multiple image mode active
NOTE:
activation of multiple image mode is also indicated on the
display by a dedicated icon in the top right corner.
“FREEZE” function.
This camera allows images to be frozen on the monitor.
This function can be activated in different ways:
• With the foot control ( see paragraph 5.2.).
• By tapping the touch button [ g ] on the camera’s handpiece.
In order to go back to the “live” image, simply tap the button again or
actuate the foot control.
These images can be displayed in two different ways: single image or
multi image.
In the latter mode, the screen is divided into four parts and 4 frozen images
are displayed simultaneously.