Anthos SMART TOUCH R7, Руководство по эксплуатации

Страница: 45 / 90

45 45 EN
R7
- OPERATING INSTRUCTION
Reduction ratio selection.
Using the icon buttons or you can select the desired reduction
ratio from those stored.
The torque value (set or current) is expressed in % or Ncm for the certified
reduction gears.
WARNING!
An icon appears next to the torque value identifying the reading
tolerance on the value indicated:
tolerance of ±10%
tolerance of ±20%.
NOTE: the data is automatically stored.
Removable cord
The micromotor has a removable cord to ease cleaning (see paragraph 5.).
Cleaning and care.
Refer to the specific instructions furnished with the instrument.
It is recommended to use Daily Oil (CEFLA s.c.) for lubrication.
WARNING!
• Do not soak the micromotor in liquid disinfectants or detergents.
• Products not recommended: harsh products and/or products containing acetone, chlorine and sodium hypochlorites.
Sterilization.
Only instrument handpiece: see paragraph 1.5.
WARNING!
Carefully read the operating instructions supplied with the instrument before attempting to sterilize.
Instructions for use.
WARNING!
• The instrument is supplied NOT STERILE and must be sterilized before use (see paragraph 1.5.).
Before performing sterilization, check the instructions for use included with the device.
• Only for American and Canadian markets: instruments must be FDA-approved.
• Never put the contra angle on the micromotor while it is running.
• The chuck release button must be held down during operation!
Friction between the button and micromotor rotor overheats the head and may cause burns.
• The patient’s internal tissues (tongue, cheeks, lips, etc...) must be protected against contact with the button by using suitable instruments
(mirror, etc...).
• The chucks and various instruments attached to the handpieces must comply to the standard ISO 10993.