Anthos SMART TOUCH R7 Скачать руководство пользователя страница 41

Страница: 41 / 90

- OPERATING INSTRUCTION

5.4. Turbine
Connecting the handpiece and changing the chuck.

Refer to the specific instructions furnished with the handpiece.

Use.

WARNING!

Read the instructions for use of the various turbines.

• The cock (

) adjusts the water flow to the spray.

• The cock (

) adjusts the amount of air spray for all the instruments.

• Place the instrument in its work position.

NOTE:

instrument activation is indicated by the relative manage-

ment page appearing on the TOUCH DISPLAY.

• The icon buttons available on the TOUCH DISPLAY are the following:

Settable value increase

Settable value decrease

Turbine rotation speed selection

Fibre optics on/off

Independent water supply selection/deselection

(only with S.H.S./S system)

Instrument spray type enable and selection

Row of general operating icons

(see paragraph 5.1.)

Quick selection of power at 1% of the maximum turbine

rotation speed

Quick selection of power at 50% of the maximum turbine

rotation speed

Quick selection of power at 100% of the maximum turbine

rotation speed.

• Use the foot control pedal to start the instrument (see paragraph 5.2).

NOTE

The turbine cord can also be used to connect the air micro-

motors equipped with 4-way connector and conform to ISO 13294 - Dental

Air Motor.

Fibre optic brightness adjustment.

• To adjust the fibre optic brightness, touch and hold (for at least 2 seconds)

the icon button

• Adjust the brightness by touching the icon

NOTE:

the settable value ranges from 1 to 16.

• To confirm the brightness selected, exit this submenu by touching the

icon button

NOTE:

after 30 seconds of not using the instrument (foot control

lever deactivated), the fibre optics turns off.

Содержание SMART TOUCH R7



























































































Результаты поиска

Содержание SMART TOUCH R7

Отзывы:

Бренды по названию

Популярные бренды

Anthos SMART TOUCH R7, Руководство по эксплуатации

Результаты поиска

Содержание SMART TOUCH R7

Отзывы:

Бренды по названию

Популярные бренды